Electrical characteristics of a vertically integrated field-effect transistor using non-intentionally doped Si nanowires

International audienceIn this letter, we report the fabrication and the electrical characterization of Vertical Gate All Around Field-Effect Transistors (GAA-FET) using non intentionally doped Silicon NanoWires (SiNWs) grown by Chemical Vapor Deposition (CVD) using the Vapor-Liquid-Solid (VLS) mechanism as conduction channel. The SiNWs GAA-FET devices exhibited n-channel type semiconductor behavior with a threshold voltage at room temperature around-1.15 V, a high ION/IOFF ratio up to 10 6 with a low IOFF current about 1 pA, a maximum transconductance (gm,max ~ 0.9 µS at VGS =-0.65 V and VDS = 1 V) and a minimum inverse subthreshold slope around 145 mV/decade. In light of these characteristics, these devices can be suitable for high performance, low power consumption components and especially for high density integration in integrated circuits (ICs) interconnections regarding to their 3D architecture

Effect of HCl on the doping and shape control of silicon nanowires

International audienceThe introduction of Hydrogen Chloride during the in-situ doping of Silicon Nanowires (SiNWs) grown using the Vapour Liquid Solid (VLS) mechanism was investigated. Compared with non-chlorinated atmospheres, the use of HCl with dopant gases considerably improves the surface morphology of the SiNWs, leading to extremely smooth surfaces and a greatly reduced tapering. The variations in the wire diameter are massively reduced for boron doping, and can not be measured at 600°C for phosphorous over several tens of micrometers. This remarkable feature is accompanied by a frozen gold migration from the catalyst, with no noticeable levels of gold clusters observed using scanning electron microscopy. A detailed study of the NWs apparent resistivity reveals that the dopant incorporation is effective for both types of doping. A graph linking the apparent resistivity to the dopant to silane dilution ratio is built for both types of doping and discussed in the frame of the previous results

Mise en place d'une expérience avec le grand public: entre recherche, vulgarisation et pédagogie

Methodological considerations on implementing a participative experimentWe present the implementation of an economic experiment conducted simultaneously in 11 French cities, with over 2700 participants, during four uninterrupted hours, during a popular-science event held in September 2015. Our goal is both to provide a roadmap for a possible replication and to discuss how the discipline can be used in new fields (science popularization, popular education, public communication)

Thin Film (High Temperature) Superconducting Radiofrequency Cavities for the Search of Axion Dark Matter

5 pages, 6 figures. v2: minor updates after referee comments, matches published version in IEEEThe axion is a hypothetical particle which is a candidate for cold dark matter. Haloscope experiments directly search for these particles in strong magnetic fields with RF cavities as detectors. The Relic Axion Detector Exploratory Setup (RADES) at CERN in particular is searching for axion dark matter in a mass range above 30 $\mu$eV. The figure of merit of our detector depends linearly on the quality factor of the cavity and therefore we are researching the possibility of coating our cavities with different superconducting materials to increase the quality factor. Since the experiment operates in strong magnetic fields of 11 T and more, superconductors with high critical magnetic fields are necessary. Suitable materials for this application are for example REBa$_2$Cu$_3$O$_{7-x}$, Nb$_3$Sn or NbN. We designed a microwave cavity which resonates at around 9~GHz, with a geometry optimized to facilitate superconducting coating and designed to fit in the bore of available high-field accelerator magnets at CERN. Several prototypes of this cavity were coated with different superconducting materials, employing different coating techniques. These prototypes were characterized in strong magnetic fields at 4.2 K.This project has received funding from the European Union’s Horizon 2020 Research and Innovation programme under Grant Agreement No 730871 (ARIES-TNA). BD and JG acknowledge funding through the European Research Council under grant ERC-2018-StG-802836 (AxScale). We also acknowledge funding via the Spanish Agencia Estatal de Investigacion (AEI) and Fondo Europeo de Desarrollo Regional (FEDER) under project PID2019- 108122GB-C33, and the grant FPI BES-2017-079787 (under project FPA2016-76978-C3-2-P). Furthermore we acknowledge support from SuMaTe RTI2018-095853-B-C21 from MICINN co-financed by the European Regional Development Fund, Center of Excellence award Severo Ochoa CEX2019- 000917-S and CERN under Grant FCCGOV-CC-0208 (KE4947/ATS).With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S).Peer reviewe

European Strategy for Particle Physics -- Accelerator R&D Roadmap

The 2020 update of the European Strategy for Particle Physics emphasised the importance of an intensified and well-coordinated programme of accelerator R&D, supporting the design and delivery of future particle accelerators in a timely, affordable and sustainable way. This report sets out a roadmap for European accelerator R&D for the next five to ten years, covering five topical areas identified in the Strategy update. The R&D objectives include: improvement of the performance and cost-performance of magnet and radio-frequency acceleration systems; investigations of the potential of laser / plasma acceleration and energy-recovery linac techniques; and development of new concepts for muon beams and muon colliders. The goal of the roadmap is to document the collective view of the field on the next steps for the R&D programme, and to provide the evidence base to support subsequent decisions on prioritisation, resourcing and implementation.Comment: 270 pages, 58 figures. Editor: N. Mounet. LDG chair: D. Newbold. Panel chairs: P. V\'edrine (HFM), S. Bousson (RF), R. Assmann (plasma), D. Schulte (muon), M. Klein (ERL). Panel editors: B. Baudouy (HFM), L. Bottura (HFM), S. Bousson (RF), G. Burt (RF), R. Assmann (plasma), E. Gschwendtner (plasma), R. Ischebeck (plasma), C. Rogers (muon), D. Schulte (muon), M. Klein (ERL

HE-LHC: The High-Energy Large Hadron Collider – Future Circular Collider Conceptual Design Report Volume 4

In response to the 2013 Update of the European Strategy for Particle Physics (EPPSU), the Future Circular Collider (FCC) study was launched as a world-wide international collaboration hosted by CERN. The FCC study covered an energy-frontier hadron collider (FCC-hh), a highest-luminosity high-energy lepton collider (FCC-ee), the corresponding 100 km tunnel infrastructure, as well as the physics opportunities of these two colliders, and a high-energy LHC, based on FCC-hh technology. This document constitutes the third volume of the FCC Conceptual Design Report, devoted to the hadron collider FCC-hh. It summarizes the FCC-hh physics discovery opportunities, presents the FCC-hh accelerator design, performance reach, and staged operation plan, discusses the underlying technologies, the civil engineering and technical infrastructure, and also sketches a possible implementation. Combining ingredients from the Large Hadron Collider (LHC), the high-luminosity LHC upgrade and adding novel technologies and approaches, the FCC-hh design aims at significantly extending the energy frontier to 100 TeV. Its unprecedented centre-of-mass collision energy will make the FCC-hh a unique instrument to explore physics beyond the Standard Model, offering great direct sensitivity to new physics and discoveries

FCC-ee: The Lepton Collider: Future Circular Collider Conceptual Design Report Volume 2

In response to the 2013 Update of the European Strategy for Particle Physics, the Future Circular Collider (FCC) study was launched, as an international collaboration hosted by CERN. This study covers a highest-luminosity high-energy lepton collider (FCC-ee) and an energy-frontier hadron collider (FCC-hh), which could, successively, be installed in the same 100 km tunnel. The scientific capabilities of the integrated FCC programme would serve the worldwide community throughout the 21st century. The FCC study also investigates an LHC energy upgrade, using FCC-hh technology. This document constitutes the second volume of the FCC Conceptual Design Report, devoted to the electron-positron collider FCC-ee. After summarizing the physics discovery opportunities, it presents the accelerator design, performance reach, a staged operation scenario, the underlying technologies, civil engineering, technical infrastructure, and an implementation plan. FCC-ee can be built with today’s technology. Most of the FCC-ee infrastructure could be reused for FCC-hh. Combining concepts from past and present lepton colliders and adding a few novel elements, the FCC-ee design promises outstandingly high luminosity. This will make the FCC-ee a unique precision instrument to study the heaviest known particles (Z, W and H bosons and the top quark), offering great direct and indirect sensitivity to new physics

FCC Physics Opportunities: Future Circular Collider Conceptual Design Report Volume 1

We review the physics opportunities of the Future Circular Collider, covering its e+e-, pp, ep and heavy ion programmes. We describe the measurement capabilities of each FCC component, addressing the study of electroweak, Higgs and strong interactions, the top quark and flavour, as well as phenomena beyond the Standard Model. We highlight the synergy and complementarity of the different colliders, which will contribute to a uniquely coherent and ambitious research programme, providing an unmatchable combination of precision and sensitivity to new physics